proxmox_ipv6
This is an old revision of the document!
If you have a Kimsufi Dedicated, you got a full /64 not just /128 which is a single IP, lets use it.
First we need to enable Forwarding on the Node:
net.ipv6.conf.all.forwarding = 1 net.ipv6.conf.all.proxy_ndp = 1 net.ipv6.bindv6only = 1
Next, we need to add IPv6 to our vmbr2, which the VM should be connected to.
iface vmbr2 inet6 static address 2601:xxxx:xx:xxx::2 netmask 64 bridge_ports none bridge_stp off bridge_fd 0 post-up echo 1 > /proc/sys/net/ipv6/conf/all/proxy_ndp post-up echo 1 > /proc/sys/net/ipv6/conf/all/forwarding post-up echo 1 > /proc/sys/net/ipv6/conf/default/forwarding post-up /sbin/ip -f inet6 neigh add proxy 2601:xxxx:xx:xxx::2 dev vmbr2 post-up /sbin/ip -f inet6 neigh add proxy 2601:xxxx:xx:xxx::3 dev vmbr0 post-up /sbin/ip -f inet6 route add 2601:xxxx:xx:xxx::3 dev vmbr2
The next thing you need to do, restart your network with:
service networking restar
Sources used: http://hw7.net/?p=252
proxmox_ipv6.1468751076.txt.gz · Last modified: 2021/11/25 22:43 (external edit)