Optional, modify netplan to set IPv4 static.\\
In /etc/netplan/50-cloud-init.yaml

remove "dhcp" on v4\\
add gateway4 and your IPv4 to addresses\\
Then run \\

  netplan apply
  
Add Incus repo

  mkdir -p /etc/apt/keyrings/ && wget -O /etc/apt/keyrings/zabbly.asc https://pkgs.zabbly.com/key.asc
  sh -c 'cat <<EOF > /etc/apt/sources.list.d/zabbly-incus-lts-6.0.sources
  Enabled: yes
  Types: deb
  URIs: https://pkgs.zabbly.com/incus/lts-6.0
  Suites: $(. /etc/os-release && echo ${VERSION_CODENAME})
  Components: main
  Architectures: $(dpkg --print-architecture)
  Signed-By: /etc/apt/keyrings/zabbly.asc
  EOF'
  
Install Incus

  apt-get update && apt-get install incus -y

Configure Storage\\
You can just run with the defaults, however running a filesystem in a filesystem is costing performance.\\
I setup my dedi at OVH with 50GB for the OS itself and left the rest unpartitioned.\\

  sudo parted /dev/sda mkpart zfs-pool 103448576s 2056573575s
  sudo parted /dev/sdb mkpart zfs-pool 103448576s 2056573575s
  sudo zpool create -f -o feature@encryption=enabled   -O encryption=aes-256-gcm -O keylocation=prompt -O keyformat=passphrase   tank mirror /dev/sda3 /dev/sdb4
  
This will setup a 1TB big, ZFS, mirrored and encrypted volume.

  
Configure Incus

  incus admin init
  
Select ZFS, if its asking to create a new one, say no and enter the name of the zfs pool instead.

Launch your first VM

  incus launch images:alpine/3.23/cloud  test --device root,size=50GiB --config limits.cpu=2 --config limits.memory=4096MiB --vm
  
Add another NIC for IPv6 support

  incus config device add test eth1 nic   nictype=routed   parent=enp1s0f0 ipv6.address=2402:xxxx:xxxx:xxx::5