proxmox_one_ip
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
proxmox_one_ip [2016/07/17 10:34] – neoon | proxmox_one_ip [2021/11/25 22:42] (current) – external edit 127.0.0.1 | ||
---|---|---|---|
Line 34: | Line 34: | ||
Netmask: 255.255.255.0 | Netmask: 255.255.255.0 | ||
IP: 10.21.21.4 | IP: 10.21.21.4 | ||
+ | |||
+ | allow-hotplug eth0 | ||
+ | iface eth0 inet static | ||
+ | address 10.21.21.4 | ||
+ | netmask 255.255.255.0 | ||
+ | network 10.21.21.0 | ||
+ | broadcast 10.21.21.255 | ||
+ | gateway 10.21.21.254 | ||
You can Forward one Port like this: | You can Forward one Port like this: | ||
Line 43: | Line 51: | ||
/ | / | ||
- | You can setup your own bash script with these commands and add it to the Startup. | + | You can setup your own bash script with these commands and add it to the Startup: [[startup|Run a Script while Booting]] |
+ | |||
+ | Or just put it into your Interfaces like that: | ||
+ | |||
+ | auto vmbr2 | ||
+ | iface vmbr2 inet static | ||
+ | address 10.21.21.254 | ||
+ | netmask 255.255.255.0 | ||
+ | bridge_ports none | ||
+ | bridge_stp off | ||
+ | bridge_fd 0 | ||
+ | post-up echo 1 > / | ||
+ | post-up iptables -t nat -A POSTROUTING -s ' | ||
+ | post-down iptables -t nat -D POSTROUTING -s ' | ||
+ | post-up iptables -t nat -A PREROUTING -i vmbr0 -p tcp --dport 2222 -j DNAT --to 10.21.21.4: | ||
+ | post-down iptables -t nat -D PREROUTING -i vmbr0 -p tcp --dport 2222 -j DNAT --to 10.21.21.4: | ||
proxmox_one_ip.1468751680.txt.gz · Last modified: 2021/11/25 22:43 (external edit)