Differences

This shows you the differences between two versions of the page.

--- incus_ovh [2026/02/22 20:51] – neoon
+++ incus_ovh [2026/02/22 21:09] (current) – neoon
@@ Line 1: / Line 1: @@
-Optional, modify netplan to set IPv4 static.
+Optional, modify netplan to set IPv4 static.\\
-/etc/netplan/50-cloud-init.yaml
+In /etc/netplan/50-cloud-init.yaml
-remove "dhcp" on v4<br>
+remove "dhcp" on v4\\
-add gateway 4 and your IPv4 to addresses<br>
+add gateway4 and your IPv4 to addresses\\
+Then run \\
   netplan apply
+Add Incus repo
+  mkdir -p /etc/apt/keyrings/ && wget -O /etc/apt/keyrings/zabbly.asc https://pkgs.zabbly.com/key.asc
+  sh -c 'cat <<EOF > /etc/apt/sources.list.d/zabbly-incus-lts-6.0.sources
+  Enabled: yes
+  Types: deb
+  URIs: https://pkgs.zabbly.com/incus/lts-6.0
+  Suites: $(. /etc/os-release && echo ${VERSION_CODENAME})
+  Components: main
+  Architectures: $(dpkg --print-architecture)
+  Signed-By: /etc/apt/keyrings/zabbly.asc
+  EOF'
+Install Incus
+  apt-get update && apt-get install incus -y
+Configure Storage\\
+You can just run with the defaults, however running a filesystem in a filesystem is costing performance.\\
+I setup my dedi at OVH with 50GB for the OS itself and left the rest unpartitioned.\\
+  sudo parted /dev/sda mkpart zfs-pool 103448576s 2056573575s
+  sudo parted /dev/sdb mkpart zfs-pool 103448576s 2056573575s
+  sudo zpool create -f -o feature@encryption=enabled   -O encryption=aes-256-gcm -O keylocation=prompt -O keyformat=passphrase   tank mirror /dev/sda3 /dev/sdb4
+This will setup a 1TB big, ZFS, mirrored and encrypted volume.
+Configure Incus
+  incus admin init
+Select ZFS, if its asking to create a new one, say no and enter the name of the zfs pool instead.
+Launch your first VM
+  incus launch images:alpine/3.23/cloud  test --device root,size=50GiB --config limits.cpu=2 --config limits.memory=4096MiB --vm
+Add another NIC for IPv6 support
+  incus config device add test eth1 nic   nictype=routed   parent=enp1s0f0 ipv6.address=2402:xxxx:xxxx:xxx::5